How to do a factory reset to Control4 DS2 Doorstation step by step.

  1. Press the RESET button.
  2. Wait until the red and green LEDs on the device come on simultaneously (approx. 20 s).
  3. Wait until the red LED goes off (approx. 5 s).
  4. Wait until the green LED goes off and the red LED comes on again (approx. 5 s).
  5. Wait until the red LED goes off (another 5 s).
  6. Release the RESET button.


The connections are quite different from the connections on our controllers or the original DSC doorstation.  Below is an image and description of what each relay/contact does.

  • IN1 is a contact input.
  • OUT1 is a relay that provides ~10 volts of power. 
  • RELAY1 is a single-pole, double-throw relay. The center post is the common, with the right being normally closed and the left being normally open.