Site icon Genesis Tech Team Studio

Configuration Guide: Starlink with Araknis Routers

Genesis Tech Team

🇬🇧 Configuration Guide: Starlink with Araknis Routers

This guide explains how to correctly integrate an Araknis router with Starlink. The goal is for Araknis to be the main router of the network, while Starlink acts solely as an internet provider..

Includes steps for:

📌 Reference sources:

Starlink setup for Araknis routers – Staub

How to Bypass the Starlink Router – DishyTech

1. Initial Starlink connections

  1. Connect the Starlink dish to its power supply.
  2. The power supply must be plugged into a grounded outlet.
  3. Connect the cables according to their colors: black to black, white to white.
  4. When correctly connected, the lights on the power supply will turn solid white.
  5. The dish will automatically level itself and orient itself toward the satellites.

⚠️ Important: Do not attempt to adjust the Starlink dish manually.

2. Connect Starlink to your Araknis router

Depending on the version of Starlink:

👉 In all cases: the final connection must be Starlink (LAN) → Araknis (WAN1).

3. Activate “Bypass Mode” in Starlink

For the Araknis router to manage the network:

  1. First connect to Starlink WiFi.
  2. Open the Starlink App (iOS/Android).
  3. Enter Settings → Bypass Mode and activate it.
  4. Confirm the action.

This will turn off the WiFi and routing functions of the Starlink router, keeping only the power to the dish on.

💡 If you do not enable bypass, you will have double NAT (two routers managing the network), which can cause connectivity issues..

4. Configuring static routes in Araknis

To make the Starlink app work in bypass mode:

  1. Access the administration portal of your Araknis router (web or OvrC).
  2. Go to Advanced → Static Route.
  3. Configure a static route:
    • Destination: 192.168.100.1
    • Subnet Mask: 255.255.255.255
    • Gateway: The WAN IP assigned by Starlink (may change, check in OvrC).
    • Interface: WAN1.

👉 If Starlink changes the WAN IP, you will need to update this route manually.

5. Configure Dual-WAN and Failover (optional)

On Araknis routers such as the AN310, you can use dual WAN:

  1. Update the firmware to version 1.1.64 or higher.
  2. Go to Multi-WAN.
  3. Activate Network Service Detection.
  4. Configure:
    • Action = Log and Failover
    • Ping Default Gateway = activated
    • Ping Remote IPs = 8.8.8.8 y 4.2.2.2

This way, if Starlink fails, Araknis will automatically switch to the second WAN connection.

6. Restore the Starlink router

If you want to go back to using your Starlink router in normal mode:

After a few minutes, you will see a WiFi network called “STARLINK.”

Connect and use the app to set up a new SSID and password.

7. Final recommendations


✅ With this configuration, Starlink will be your internet provider and Araknis will manage the entire network, with full support for the Starlink app and failover capability.

🇪🇸 Guía de Configuración: Starlink con Routers Araknis

Esta guía explica cómo integrar correctamente un router Araknis con Starlink. El objetivo es que Araknis sea el router principal de la red, mientras Starlink actúe únicamente como proveedor de internet.

Incluye pasos para:

📌 Fuentes de referencia:

Starlink setup for Araknis routers – Staub

How to Bypass the Starlink Router – DishyTech

1. Conexiones iniciales de Starlink

  1. Conecta el plato Starlink a su fuente de alimentación.
  2. La fuente debe enchufarse en un tomacorriente con toma a tierra.
  3. Conecta los cables siguiendo los colores: negro a negro, blanco a blanco.
  4. Cuando esté correctamente conectado, las luces de la fuente se pondrán en blanco fijo.
  5. El plato se nivelará y orientará automáticamente hacia los satélites.

⚠️ Importante: No intentes ajustar manualmente el plato Starlink.

2. Conectar Starlink a tu router Araknis

Dependiendo de la versión de Starlink:

👉 En todos los casos: la conexión final debe ser Starlink (LAN) → Araknis (WAN1).

3. Activar “Bypass Mode” en Starlink

Para que el router Araknis gestione la red:

  1. Conéctate primero al WiFi Starlink.
  2. Abre la Starlink App (iOS/Android).
  3. Entra en Settings → Bypass Mode y actívalo.
  4. Confirma la acción.

Esto apagará el WiFi y las funciones de enrutamiento del router Starlink, manteniendo solo la energía al plato.

💡 Si no activas bypass, tendrás doble NAT (dos routers gestionando la red), lo cual puede causar problemas de conectividad.

4. Configuración de rutas estáticas en Araknis

Para que la app de Starlink funcione en bypass:

  1. Entra al portal de administración de tu router Araknis (web u OvrC).
  2. Ve a Advanced → Static Route.
  3. Configura una ruta estática:
    • Destination: 192.168.100.1
    • Subnet Mask: 255.255.255.255
    • Gateway: la IP WAN que Starlink asigna (puede cambiar, verifica en OvrC).
    • Interface: WAN1.

👉 Si Starlink cambia la IP WAN, deberás actualizar esta ruta manualmente.

5. Configurar Dual-WAN y Failover (opcional)

En routers Araknis como el AN310 puedes usar doble WAN:

  1. Actualiza el firmware a v1.1.64 o superior.
  2. Entra a Multi-WAN.
  3. Activa Network Service Detection.
  4. Configura:
    • Acción = Log and Failover
    • Ping Default Gateway = activado
    • Ping Remote IPs = 8.8.8.8 y 4.2.2.2

De esta forma, si Starlink falla, el Araknis pasará automáticamente a la segunda conexión WAN.

6. Restaurar de fábrica el router Starlink

Si deseas volver a usar el router Starlink en modo normal:

Después de unos minutos, verás una red WiFi llamada “STARLINK”.

Conéctate y usa la app para configurar un nuevo SSID y contraseña.

7. Recomendaciones finales


✅ Con esta configuración, Starlink será tu proveedor de internet y Araknis gestionará toda la red, con soporte completo de la app de Starlink y posibilidad de failover.

🇮🇹 Configurazione Starlink per router Araknis

Questa guida spiega come integrare correttamente un router Araknis con Starlink. L’obiettivo è che Araknis sia il router principale della rete, mentre Starlink funga solo da fornitore di servizi Internet.

Include i passaggi per:

📌 Fonti di riferimento:

Starlink setup for Araknis routers – Staub

How to Bypass the Starlink Router – DishyTech

1. Connessioni iniziali di Starlink

  1. Collegare il piatto Starlink alla sua fonte di alimentazione.
  2. La fonte deve essere collegata a una presa di corrente con messa a terra.
  3. Collegare i cavi seguendo i colori: nero con nero, bianco con bianco.
  4. Una volta collegato correttamente, le luci della fonte diventeranno bianche fisse.
  5. Il piatto si livellerà e si orienterà automaticamente verso i satelliti.

⚠️ Importante: non tentare di regolare manualmente il piatto Starlink.

2. Collegare Starlink al router Araknis

A seconda della versione di Starlink:

👉 In tutti i casi: il collegamento finale deve essere Starlink (LAN) → Araknis (WAN1).

3. Attivare la “modalità bypass” su Starlink

Affinché il router Araknis gestisca la rete:

  1. Connettiti prima al WiFi Starlink.
  2. Apri la Starlink App (iOS/Android).
  3. Entra in Settings → Bypass Mode e attivalo.
  4. Conferma l’azione.

Questo spegnerà il WiFi e le funzioni di routing del router Starlink, mantenendo solo l’alimentazione dell’antenna.

💡 Se non attivi il bypass, avrai un doppio NAT (due router che gestiscono la rete), il che può causare problemi di connettività.

4. Configurazione dei percorsi statici in Araknis

Per far funzionare l’app Starlink in bypass:

  1. Accedi al portale di amministrazione del tuo router Araknis (web o OvrC).
  2. Ve a Advanced → Static Route.
  3. Configura un percorso statico:
    • Destination: 192.168.100.1
    • Subnet Mask: 255.255.255.255
    • Gateway: l’IP WAN assegnato da Starlink (può cambiare, verificare su OvrC).
    • Interface: WAN1.

👉 Se Starlink modifica l’IP WAN, dovrai aggiornare manualmente questo percorso.

5. Configurare Dual-WAN e Failover (opzionale)

Nei router Araknis come l’AN310 è possibile utilizzare la doppia WAN:

  1. Aggiorna il firmware a v1.1.64 o superiore.
  2. Accedi a Multi-WAN.
  3. Attiva Network Service Detection.
  4. Configura:
    • Azione = Log and Failover
    • Ping Default Gateway = activado
    • Ping Remote IPs = 8.8.8.8 y 4.2.2.2

In questo modo, se Starlink dovesse fallire, Araknis passerà automaticamente alla seconda connessione WAN.

6. Ripristino delle impostazioni di fabbrica del router Starlink

SSe desideri tornare a utilizzare il router Starlink in modalità normale:

Gen 3: tieni premuto il pulsante di reset sul retro (tra le porte Ethernet).

Gen 2: scollega e ricollega l’alimentazione 6 volte di seguito.

Dopo alcuni minuti, vedrai una rete WiFi chiamata “STAR”.LINK”.

Connettiti e utilizza l’app per configurare un nuovo SSID e una nuova password.

7. Raccomandazioni finali


✅ Con questa configurazione, Starlink sarà il tuo fornitore di servizi Internet e Araknis gestirà l’intera rete, con supporto completo dell’app Starlink e possibilità di failover.

🇫🇷 Starlink setup for Araknis routers

Questa guida spiega come integrare correttamente un router Araknis con Starlink. L’obiettivo è che Araknis sia il router principale della rete, mentre Starlink funga solo da fornitore di servizi Internet.

Include i passaggi per:

📌 Sources de référence:

Starlink setup for Araknis routers – Staub

How to Bypass the Starlink Router – DishyTech

1. Connexions initiales de Starlink

  1. Branchez la parabole Starlink à son alimentation électrique.
  2. L’alimentation doit être branchée sur une prise de courant avec mise à la terre.
  3. Branchez les câbles en suivant les couleurs : noir sur noir, blanc sur blanc.
  4. Une fois correctement connectée, les voyants de l’alimentation s’allument en blanc fixe.
  5. La parabole se mettra automatiquement à niveau et s’orientera vers les satellites.

⚠️ Important : n’essayez pas de régler manuellement la parabole Starlink.

2. Connecter Starlink à votre routeur Araknis

Selon la version de Starlink :

👉 Dans tous les cas : la connexion finale doit être Starlink (LAN) → Araknis (WAN1).

3. Activer le « mode bypass » dans Starlink

Pour que le routeur Araknis gère le réseau :

  1. Connectez-vous d’abord au WiFi Starlink.
  2. Ouvrez l’application Starlink (iOS/Android).
  3. Allez dans Paramètres → Mode Bypass et activez-le.
  4. Confirmez l’action.

Cela désactivera les fonctions WiFi et de routage du routeur Starlink, tout en maintenant l’alimentation de l’antenne parabolique.

💡 Si vous n’activez pas le bypass, vous aurez un double NAT (deux routeurs gérant le réseau), ce qui peut causer des problèmes de connectivité.

4. Configuration des routes statiques dans Araknis

Pour que l’application Starlink fonctionne en mode bypass :

  1. Accédez au portail d’administration de votre routeur Araknis (web ou OvrC).
  2. Allez dans Advanced → Static Route.
  3. Configurez un itinéraire statique:
    • Destination: 192.168.100.1
    • Subnet Mask: 255.255.255.255
    • Gateway: l’adresse IP WAN attribuée par Starlink (elle peut changer, vérifiez dans OvrC).
    • Interface: WAN1.

👉 Si Starlink modifie l’adresse IP WAN, vous devrez mettre à jour ce chemin manuellement.

5. Configurer le double WAN et le basculement (facultatif)

Sur les routeurs Araknis tels que l’AN310, vous pouvez utiliser le double WAN :

  1. Mettez à jour le micrologiciel vers la version v1.1.64 ou supérieure.
  2. Entrez dans Multi-WAN.
  3. Activez Network Service Detection.
  4. Configura:
    • Acción = Log and Failover
    • Ping Default Gateway = activado
    • Ping Remote IPs = 8.8.8.8 y 4.2.2.2

Ainsi, si Starlink tombe en panne, l’Araknis basculera automatiquement vers la deuxième connexion WAN.

6. Réinitialisation d’usine du routeur Starlink

Si vous souhaitez réutiliser le routeur Starlink en mode normal :

Après quelques minutes, vous verrez apparaître un réseau WiFi appelé « STARLINK ».

Connectez-vous et utilisez l’application pour configurer un nouveau SSID et un nouveau mot de passe.

7. Recommandations finales


✅ Avec cette configuration, Starlink sera votre fournisseur d’accès Internet et Araknis gérera l’ensemble du réseau, avec une prise en charge complète de l’application Starlink et une possibilité de basculement.

🇵🇹 Starlink setup for Araknis routers

Este guia explica como integrar corretamente um router Araknis com o Starlink. O objetivo é que o Araknis seja o router principal da rede, enquanto o Starlink atua apenas como fornecedor de Internet.

Inclui passos para:

📌 Fontes de referência:

Starlink setup for Araknis routers – Staub

How to Bypass the Starlink Router – DishyTech

1. Ligações iniciais da Starlink

  1. Ligue a antena Starlink à sua fonte de alimentação.
  2. A fonte deve ser ligada a uma tomada com ligação à terra.
  3. Ligue os cabos seguindo as cores: preto com preto, branco com branco.
  4. Quando estiver corretamente ligada, as luzes da fonte ficarão brancas fixas.
  5. A antena nivelar-se-á e orientar-se-á automaticamente para os satélites.

⚠️ Importante: Não tente ajustar manualmente a antena Starlink.

2. Ligar o Starlink ao seu router Araknis

Dependendo da versão do Starlink:

👉 Em todos os casos: a conexão final deve ser Starlink (LAN) → Araknis (WAN1).

3. Ativar o «Modo Bypass» no Starlink

Para que o router Araknis gerencie a rede:

  1. Primeiro, conecte-se ao WiFi Starlink.
  2. Abra a aplicação Starlink (iOS/Android).
  3. Aceda a Settings → Bypass Mode e ative-o.
  4. Confirme a ação.

Isso desligará o WiFi e as funções de roteamento do router Starlink, mantendo apenas a energia da antena.

💡 Se não ativar o bypass, terá NAT duplo (dois routers a gerir a rede), o que pode causar problemas de conectividade.

4. Configuração de rotas estáticas no Araknis

Para que a aplicação Starlink funcione em bypass:

  1. Aceda ao portal de administração do seu router Araknis (web ou OvrC).
  2. Vá a Advanced → Static Route.
  3. Configure um caminho estático:
    • Destination: 192.168.100.1
    • Subnet Mask: 255.255.255.255
    • Gateway: o IP WAN atribuído pela Starlink (pode mudar, verifique no OvrC).
    • Interface: WAN1.

👉 Se a Starlink alterar o IP WAN, você deverá atualizar essa rota manualmente.

Configurar Dual-WAN e Failover (opcional)

Em routers Araknis como o AN310, pode usar WAN dupla.:

  1. Atualize o firmware para a versão v1.1.64 ou superior.
  2. Entre em Multi-WAN.
  3. Activa Network Service Detection.
  4. Configura:
    • Ação = Log and Failover
    • Ping Default Gateway = activado
    • Ping Remote IPs = 8.8.8.8 y 4.2.2.2

Assim, se o Starlink falhar, o Araknis passará automaticamente para a segunda ligação WAN.

6. Restaurar as configurações de fábrica do router Starlink

Se desejar voltar a utilizar o router Starlink no modo normal:

Após alguns minutos, verá uma rede Wi-Fi chamada «STARLINK».

Ligue-se e utilize a aplicação para configurar um novo SSID e palavra-passe.

7. Recomendações finais


✅ Com esta configuração, a Starlink será o seu fornecedor de Internet e a Araknis irá gerir toda a rede, com suporte completo da aplicação da Starlink e possibilidade de failover.

🇩🇪 Konfigurationsanleitung: Starlink mit Araknis-Routern

In dieser Anleitung wird erklärt, wie Sie einen Araknis-Router korrekt in Starlink integrieren. Das Ziel ist, dass Araknis als Hauptrouter des Netzwerks fungiert, während Starlink ausschließlich als Internetanbieter dient.

Enthält Schritte für:

📌 Referenzquellen:

Starlink setup for Araknis routers – Staub

How to Bypass the Starlink Router – DishyTech

1. Erste Starlink-Verbindungen

  1. Schließen Sie die Starlink-Antenne an die Stromversorgung an.
  2. Das Netzteil muss an eine geerdete Steckdose angeschlossen werden.
  3. Schließen Sie die Kabel entsprechend ihrer Farben an: schwarz an schwarz, weiß an weiß.
  4. Bei korrektem Anschluss leuchten die Anzeigen am Netzteil dauerhaft weiß.
  5. Die Antenne richtet sich automatisch aus und orientiert sich in Richtung der Satelliten.

⚠️ Wichtig: Versuchen Sie nicht, die Starlink-Antenne manuell einzustellen.

2. Verbinden Sie Starlink mit Ihrem Araknis-Router.

Je nach Version von Starlink:

👉 In allen Fällen: Die endgültige Verbindung muss Starlink (LAN) → Araknis (WAN1).

3. Aktivieren Sie den „Bypass-Modus“ in Starlink.

Damit der Araknis-Router das Netzwerk verwalten kann:

Dadurch werden die WLAN- und Routing-Funktionen des Starlink-Routers deaktiviert, sodass nur noch die Stromversorgung der Antenne aktiv bleibt.

💡 Wenn Sie den Bypass nicht aktivieren, kommt es zu doppeltem NAT (zwei Router verwalten das Netzwerk), was zu Verbindungsproblemen führen kann.

4. Konfigurieren statischer Routen in Araknis

Damit die Starlink-App im Bypass-Modus funktioniert:

  1. Rufen Sie das Verwaltungsportal Ihres Araknis-Routers auf (Web oder OvrC).
  2. Gehen Sie zu Advanced → Static Route.
  3. Konfigurieren Sie eine statische Route.:
    • Destination: 192.168.100.1
    • Subnet Mask: 255.255.255.255
    • Gateway: Die von Starlink zugewiesene WAN-IP (kann sich ändern, bitte in OvrC überprüfen).
    • Interface: WAN1.

👉 Wenn Starlink die WAN-IP-Adresse ändert, müssen Sie diese Route manuell aktualisieren..

5. Configure Dual-WAN and Failover (optional)

On Araknis routers such as the AN310, you can use dual WAN:

  1. Update the firmware to version 1.1.64 or higher.
  2. Go to Multi-WAN.
  3. Activate Network Service Detection.
  4. Configure:
    • Action = Log and Failover
    • Ping Default Gateway = activated
    • Ping Remote IPs = 8.8.8.8 y 4.2.2.2

This way, if Starlink fails, Araknis will automatically switch to the second WAN connection.

6. Restore the Starlink router

If you want to go back to using your Starlink router in normal mode:

After a few minutes, you will see a WiFi network called “STARLINK.”

Connect and use the app to set up a new SSID and password.

7. Final recommendations


✅ With this configuration, Starlink will be your internet provider and Araknis will manage the entire network, with full support for the Starlink app and failover capability.

Copyright: Staub and DishyTech

Exit mobile version